Customization: | Available |
---|---|
Antenna Diameter: | 4.5m |
Antenna Type: | Ring Focus |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Model | NS-SECK-450 | |
Working frequency, GHz | Receive | Transmit |
17.7~21.2 | 27.5~31 | |
Antenna gain dBi | [email protected] (2 port) [email protected] (4 port) |
[email protected] ( 2port) [email protected] (4 port) |
Polarization | Circular | |
XPD dB(linear) | 35 | 35 |
Axial Ratio(2 port, circular) | 1.5 | 1.5 |
Axial Ratio(4 port, circular) | 1.0 | 1.0 |
VSWR | 1.35 | 1.35 |
Noise temperature 10°Elevation 20°Elevation 30°Elevation 50°Elevation |
116 K 86K 75 K 70 K |
|
G/T dB/K,10°El | G/T dB/K,10°Elevation | / |
-3dB beam width | 0.23° | 0.15° |
Insertion loss, dB | 0.6 | 0.6 |
Tx power capacity, KW | / | 2 |
Interface | WR-42 | WR-28 |
Tx-Rx isolation, dB | 85 | |
First Sidelobe 90% Peaks under Following envelop |
-14 29 - 25 logθ(1°≤θ<20°) |
Antenna diameter | 4.5 m |
Antenna type | Ring focus |
Antenna mount type | EL over AZ |
RMS | ≤0.3mm |
Antenna weight(N.W) | 1200 |
Antenna travel range AZ EL Pol |
0°~360° 0°~90° ±90°° |
Antenna drive mode | Manual or motorized |
Rotation speed | Single speed/ dual speed/ Variable speed |
Working wind speed | 72 km/h |
Without damage | 216 km/h |
Working temperature | -30ºC~50ºC |
Humidity | 100% |
Solar radiation | 1135Kcal/h/m² |
Ice load | Work normally: 13mm ; without damage: 25mm |
Seismic capacity | Horizontal: 0.3G; vertical: 0.1G |
Surface treatment | Steel parts: hot dip galvanized; aluminum part: primer paint+surface paint |