Customization: | Available |
---|---|
Application: | Commercial |
Customized: | Customized |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Characteristics:
1.Meets or exceeds CCIR 580 and INTELSAT requirements
2.Offset antenna;
3.Light weight,small volume,high accurancy,high strength;
4.High gain, Low sidelobe, high G/T rate;
5.Hot-dipped zinc processed Antenna mount, with strong corrosion resistant ability;
Accessories:
Foundation drawing, foundation template, anchor bolts.
Optional:
Non-penetrating mount.
ELECTRICAL SPECIFICATIONS
Model |
NS-FM-180 |
NS-FM-180 |
|||
C-band |
Ku-band |
||||
RX |
TX |
RX |
TX |
||
Frequency, GHz |
3.4~4.2 |
5.85~6.725 |
10.95~12.75 | 13.75~14.5 | |
Gain,Mid-band, dBi |
35.22 |
39.13 @6.2Ghz |
45.22
@12.5Ghz |
46.36 @14.25Ghz |
|
Pol |
Linear / circular |
Linear | |||
VSWR |
1.25 |
1.25 |
1.25 |
1.25 |
|
Cross polarization Isolation, dB | 35 | 35 | |||
Noise temperature |
10°elevation |
35°K |
43°K |
||
-3dBBWave width, Mid-band |
2.85° |
1.82° |
0.9° |
0.79° |
|
Isolation,Rx to Tx,dB | 85 | 85 | |||
G/T |
16.62dB/K |
24.48dB/K |
|||
Feed loss, dB |
0.2 |
0.2 |
0.4 |
0.5 |
|
Power Conten, KW |
5 |
|
2 |
||
Interface |
CPR-229G |
CPR-137G |
WR-75 |
WR-75 |
|
First sidelobe | ≤-14 | ||||
Side lobe envelop | 29-25 log(θ) dBi 1°≤θ≤20° |
MECHANICAL SPECIFICATIONS
Size | 1.8m | ||||
Type | Offset | ||||
Kingpost | Az / El | ||||
Surface accuracy (RMS) | ≤0.5mm | ||||
Driver model | Manual | ||||
Panel material | Carbon fiber or Aluminum | ||||
Panel qty | 4pcs | ||||
Travel range |
Az
El
Pol
|
0-360° (continuous)
5°~90° (continuous)
±90° (continuous)
|
Wind speed of work |
72kmph work wind speed(Hold the precision ) 97kmph work wind speed(Lower the precision ) 200kmph Survival Winds(Upturned lock) |
Ice Load, Survival |
13mm Wrapped ice normal work 25mm Wrapped ice survival |
Temperature |
-30ºC~50ºC |
Relative Humidity |
100% |
Surface treatment |
Steel parts: thermal-spraying zinc Aluminum parts:spray paint |
Solar Radiation |
1135Kcal/h/m² |